How to Tow a Classic Car Safely

To tow a classic car safely, you usually need a flatbed recovery truck or vehicle transporter that carries all four wheels off the road, with loading equipment suited to the car's ground clearance and condition. Choose an operator experienced with older vehicles, agree on suitable attachment points, and document the car's condition before collection and after delivery.

What is the safest way to tow a classic car?

For most classic cars, choosing a flatbed avoids the risk of damage to the transmission, differential and wheel bearings when the wheels turn on the road. It also keeps ageing tyres off the road during transport, although they must still support the car during loading unless the operator uses specialist equipment.

A wheel-lift truck raises one axle and leaves the other on the road. This may suit some vehicles, but your operator must first check the manufacturer's towing instructions, drivetrain layout and condition. Neutral is not enough to ensure that an older automatic transmission can safely turn without the engine running.

Avoid sling-type equipment that supports the car by its bodywork or bumpers. Decorative bumpers, overriders and older mounting brackets are not reliable lifting points. If a flatbed cannot reach your car, ask how the operator will move it to a suitable loading position without dragging it.

Choose an enclosed transporter if you want extra protection from road debris, dust and public access. It can be a sensible choice for a freshly restored, rare or particularly valuable car. An open flatbed may be adequate for a shorter trip, provided the loading and securing methods suit your vehicle.

What should you ask before booking a tow?

Ask specifically about experience with classic vehicles, rather than accepting a general assurance that the operator transports cars. If your car has modified suspension, a fragile finish or a seized brake, the operator may need different equipment.

  • Give the exact model, approximate weight and dimensions, including any modifications.
  • Describe low exhausts, spoilers, running boards and limited ground clearance.
  • Confirm whether the car starts, rolls, steers and brakes, and report any leaks or seized components.
  • Explain access restrictions at collection and delivery, including narrow gates and steep entrances.
  • Request a written price covering loading, recovery equipment, waiting time, storage and delivery.
  • Ask whether your car will stay on one transporter or move between vehicles.

Check insurance limits and exclusions before you book. Ask what cover applies during winching, loading, transport, unloading and any storage, and whether the limit is enough to cover your car's documented value. Don't assume the operator's liability policy guarantees full replacement value; ask your insurer or a qualified insurance adviser to explain any gaps.

How should you prepare your classic car for towing?

Photograph every side, the roof, glass, wheels and accessible underside before collection. Include close-ups of existing chips, scratches and loose trim, plus the odometer reading. Record these details on a condition report that both you and the operator acknowledge.

Remove valuables and unsecured items from the cabin and boot. Secure removable roof panels and detachable accessories according to their instructions. Don't fit a loose cover unless the transporter approves it: movement against the paint can cause abrasion, and an unsuitable cover may come free.

Give the driver written instructions for unfamiliar controls, including the battery isolator, ignition, parking brake and bonnet release. Supply the necessary keys, but keep a spare set yourself. Don't disconnect the battery without checking whether the operator needs power for steering, brake release or loading.

Report fuel or brake-fluid leaks before anyone starts the engine or operates the car. Don't start an engine that has been idle for a long time simply to make loading easier; tell the operator to plan to collect the car without running it. Check tyre condition and use the vehicle's specified pressures if the tyres are still serviceable.

How should you load a classic car onto a flatbed?

Ground clearance and ramp angle determine whether the nose, exhaust or underside will scrape. Give the operator the car's lowest clearance measurement if possible. Your car may need a tilt-and-slide bed, longer ramps or purpose-designed ramp extensions, particularly if it has lowered suspension or a long front overhang.

Ask the operator to check clearance as your car moves onto the bed and again where the ramp meets the deck. A car can clear the ramp initially and still ground at this transition. Ask the driver to stop if any component comes close to touching, rather than continuing in the hope it will clear.

Make sure the operator attaches the winch to a verified recovery or loading point suitable for the direction of pull. Never pull from bumpers, steering links, brake pipes or suspension parts that the operator hasn't verified as suitable. Age, corrosion and previous repairs can make an apparently strong attachment point unsafe.

If wheels are locked or tyres have failed, your operator may need wheel skates, dollies or other specialist equipment. Dragging locked wheels can damage tyres and put unnecessary strain on the car. Keep clear of winch lines, ramps and the vehicle's path throughout loading.

How should the operator secure your classic car?

Ask about wheel straps or tyre baskets, which often avoid direct contact with delicate bodywork. The system must suit your car's wheels and tyres as well as the transporter. Your operator must also check that straps cannot rub against brake hoses, sharp edges, trim or painted surfaces.

If your car needs chassis tie-downs, the operator must use suitable, structurally sound attachment points. Factory shipping points, recovery eyes and suspension components are not automatically interchangeable. Ask the operator to verify each point's purpose rather than choose a convenient opening.

The winch is not a tie-down, and the parking brake does not replace proper restraints. The Federal Motor Carrier Safety Administration sets out vehicle-securement requirements within its cargo rules. Your operator must follow the rules that apply to the transport and use equipment with appropriate load ratings.

What should you check after delivery?

Ask the driver to unload onto firm, level ground with enough space to check clearance. Take the same precautions as during loading, especially if your car cannot brake or steer normally.

Before signing to confirm receipt without noting any damage, compare your car with your collection photographs and condition report. Check the lower body edges, exhaust, wheels, tyres and any areas near strap attachment points. Look underneath for fresh leaks without crawling under an unsupported vehicle.

Photograph any new damage and record it on the delivery paperwork before the driver leaves. Notify the transporter and relevant insurer promptly, following their reporting procedures. If you find a new leak, hear a scraping noise or notice a steering or braking problem, leave the car parked until a qualified mechanic checks it.

Sources