Underground car park recovery usually involves moving your car to an accessible loading area using a low-clearance recovery vehicle, wheel dollies or controlled winching, then loading it onto a suitable transporter. Your recovery operator chooses the method after checking your car's condition, the available headroom, the ramps and whether the wheels can turn.
How does underground car park recovery work?
A full-size recovery truck often cannot fit beneath the entrance height barrier or turn through the internal lanes. Instead, your operator brings equipment that can reach your parking space and move your car through the restricted space.
If your car rolls freely and its steering and brakes work, a compact recovery vehicle may tow it out using an approved towing connection. If it cannot roll, your operator may lift individual wheels onto dollies or use specialist lifting equipment. Once outside, your operator usually loads your car onto a flatbed or another transporter suitable for its drivetrain and condition.
The exit isn't always the best loading point. Your operator needs enough room to position the transporter, extend its loading bed and winch your car aboard without blocking traffic or breaching the site's access restrictions.
What should you tell the recovery company?
Tell the recovery company straight away that your car is underground. Otherwise, it may send a standard roadside recovery truck that cannot reach you.
- Give your car's make, model and approximate year, and say whether it's electric, hybrid, automatic or all-wheel drive.
- Describe the fault, including any collision damage, fluid leaks, missing wheels or loss of electrical power.
- Confirm whether you have the keys and whether you can release the steering lock, select neutral and release the parking brake.
- Provide the posted height limit, parking level, bay number and access instructions.
- Send photographs of the entrance, ramps, tight corners and the space around your car.
- Explain any gate controls, opening restrictions or permissions you'll need from the car park operator.
The lowest clearance along the route matters more than the entrance height alone. Internal beams, pipes and signs can sit lower, while changes in ramp angle can reduce clearance above or beneath a recovery vehicle. Don't enter traffic lanes or climb onto structures to take measurements; ask site staff for access information.
Your photographs can also show obstacles that a height measurement misses, such as columns close to your car or a sharp turn at the top of a ramp.
What equipment moves a car with locked wheels?
Wheel dollies support the tyres on small wheeled platforms, allowing your operator to reposition your car even if its wheels cannot turn. They're particularly useful for moving your car out of a tight bay or sideways into a position where other recovery equipment can reach it.
Loading skates serve a different purpose: they reduce friction beneath a locked tyre during a controlled pull over a suitable surface. Your operator cannot assume that skates or workshop-style dollies are suitable for steep ramps, uneven joints or a long tow. They must check the equipment's load ratings, permitted use and suitability for the floor surface.
A low-clearance wheel-lift vehicle can raise one axle, with suitable dollies supporting the other axle when necessary. This can keep all four of your car's wheels off the ground, but the complete setup must still fit through the car park and around its turns.
If your battery is flat, your operator may use an approved power supply to select neutral or release an electronic parking brake. Some cars require a specific manual release procedure. Don't force the gear selector, dismantle trim or pull a release cable without the correct instructions: your car may roll unexpectedly, and some releases don't unlock the steering.
How do recovery operators move cars safely on ramps?
Controlled movement on slopes is a major part of the job. Before moving your car, your operator checks the route, equipment capacity and attachment points, and plans how to keep your car restrained throughout the move.
A winch may pull your car or help restrain it, depending on the recovery setup. Your operator may use rated pulleys to change the direction of pull where a straight approach is impossible, but only with suitable anchor points. They cannot assume that a conveniently placed column, railing or pipe is a safe anchor.
Steep ramps also create ground-clearance problems. Your car may scrape as the slope changes if it has a low bumper, damaged suspension or a long wheelbase. Your operator may need approved bridging equipment, a different lifting arrangement or another route.
Keep clear of the working area during recovery. Choosing a suitable route and keeping people away from moving vehicles are central principles in Health and Safety Executive workplace transport guidance. Site staff may need to stop traffic temporarily or restrict access while your operator moves your car.
How are electric, hybrid, automatic and all-wheel-drive cars recovered?
If you have an electric, hybrid, automatic or all-wheel-drive car, the manufacturer's recovery instructions determine which wheels may remain on the ground and under what conditions. Selecting neutral doesn't automatically make your car safe to tow; rotating wheels can still drive components that require protection.
A flatbed is often the preferred transport method, but your operator still needs an approved way to move your car from its bay to the truck. Any tow or transport mode may have speed, distance or power-supply limits. Tell the recovery company about air suspension, very low ground clearance or underbody damage before it sends equipment.
If your electric vehicle has damage around the battery, unusual heat, smoke or hissing, stop approaching it and notify the emergency services and car park staff. Don't attempt an ordinary recovery until emergency responders have assessed the immediate hazard.
What should you do before recovery arrives?
Keep your keys available, remove essential belongings if you can safely reach your car, and contact site management about access. Don't push your car onto a ramp or attempt a rope tow through the car park. Leave it secured until your operator is ready to control its movement.
Ask for a quote that includes extraction and onward transport. The cost depends on access restrictions, your car's condition, specialist equipment, staffing and the distance to your destination. Confirm whether parking charges, access delays or additional equipment could change the price, and tell the company where you want your car delivered before it arrives.
Sources
- Workplace transport · HSE (hse.gov.uk)